FIG 40
The Fabricast FIG 40 is a metal seated, uni-directional knife gate valve. Designed and tested to MSS SP81 and ASME B16.5 specifications.
Features
- Heavy Duty Cast CF8 304 Stainless Steel Body, Packing Gland, Yoke, Stemnut Retainer and Gate Clevis. Sizes larger than 24″ are available in a fabricated and welded design.
- Full Port.
- 150 Psi Cwp Rated.
- Precision Cnc Machined Valve Body And Stem.
- ASTM A 240 304 Stainless Steel gate fully machined, beveled and surface ground. All edges are chamfered to extend packing life and to provide a superior atmospheric seal.
- 14″ and larger valves are supplied with a ball bearing yoke bushing to reduce handwheel rimpull.
- Braided Teflon Synthetic Packing is standard 3-11 PH rating.
- Cast WCB Steel handwheel (weldable)
- Easily adapted to Air Cylinder, Hydraulic Cylinder, Bevel Gear, Lever or Electric Motor Operator (no welding required).
Options
- O-ring Seat – Buna N 200 Deg F, Epdm 300 Deg F, Hdpe/uhmwpe 200 Deg F, Fkm/viton – 400 Deg F. Other – Contact Factory
- Other Alloys – 310, 316, 317l, Duplex 2205, 2507,904l, Hastelloy, Titanium Other – Contact Factory
- Mechanical Lockouts – Manual And Actuated Valves
- Osha Gate Guard
- Pneumatic, Hydraulic And Spring Cylinder, Electric Motor Operator, 3:1 And 4:1 Bevel Gear Operator, Chainwheel, Stem Extensions, Lever Operator
- Packings – Ptfe, Graphite, Kevlar, Food Grade, Other – Contact Factory
- Purge / Flushing Ports
- Limit / Proximity Switches, Solenoid Valves, Positioners, Air Sets, Speed Controls, Exhaust Mufflers, Air Tank Failsafe Systems, Air Boosters
- V Port Inserts For Flow Control
- Deflector Cones For Abrasive Service
- Ni-resist Alloy Stemnut
- Live Loaded Packing System
- Specialty Gate Coatings
- Hardsurfacing For Abrasive Service
- Backing Ring For Reverse Flow Or Horizontal Valve Orientation
- Bonneted Design
- High Pressure
- High Temperature
PREVIOUS MODEL WAS FV-150-MM
